Skip to content
VialUnits

Sermorelin 5 mg vial: water, concentration and units

A 5 mg Sermorelin vial with 2 mL of water is 2.5 mg/mL, so one unit on a U-100 syringe holds 25 mcg and 10 units hold 250 mcg.

Other water volumes and syringes are below. Unit conversion only.

Quick reference

Sermorelin 5 mg vial at common water volumes
Water addedConcentration1 unit (U-100)10 units
1 mL5 mg/mL50 mcg500 mcg
2 mL2.5 mg/mL25 mcg250 mcg
3 mL1.667 mg/mL16.7 mcg166.7 mcg
mg
mL

Your number. This site never suggests one.

Concentration

2.5mg/mL

Enter an amount to see the syringe reading.

0102030405060708090100
U-100, 1 mL (100 units): empty. Enter values to see the reading.

What each reading holds

Units (U-100)mLHolds
100.1250 mcg
250.25625 mcg
500.51.25 mg
10012.5 mg
Work backwards: how much water?

Pick how many units you want your amount to read, and this gives the water volume that produces that concentration for Sermorelin.

units

Enter the vial amount and the amount to measure first.

Math only. Check every number against your vial label.

By [Author name]. Licensed pharmacist review: pending. Last updated .

The math for this vial

  1. Concentration: 5 mg ÷ 2 mL = 2.5 mg/mL (2,500 mcg/mL).
  2. Volume of one U-100 unit: 1 ÷ 100 = 0.01 mL.
  3. Mass in one unit: 2,500 mcg/mL × 0.01 mL = 25 mcg.
  4. The whole vial is 200 U-100 units of solution, more than one 1 mL syringe holds.

On a U-40 syringe each unit is 0.025 mL, so each unit holds 2.5 times as much: 62.5 mcg at 2 mL. See U-100 vs U-40 units.

Unit chart

What common U-100 readings hold from a 5 mg vial, by water volume.

UnitsmL1 mL water2 mL water3 mL water
10.0150 mcg25 mcg16.7 mcg
50.05250 mcg125 mcg83.3 mcg
100.1500 mcg250 mcg166.7 mcg
200.21 mg500 mcg333.3 mcg
250.251.25 mg625 mcg416.7 mcg
500.52.5 mg1.25 mg833.3 mcg
10015 mg2.5 mg1.667 mg

About this vial size

5 mg is a mid-size Sermorelin vial. Across the water volumes above, one U-100 unit holds between 16.7 mcg (at 3 mL) and 50 mcg (at 1 mL). Compared with a 2 mg vial at the same water volume, it is 2.5 times as concentrated, so the same mass takes 0.4 times the units. A 10 mg vial at the same water volume is 2 times as concentrated as this one.

Microgram amounts from small vials land in single or low double-digit units. On a 1 mL syringe marked every 2 units, odd-unit results fall between marks; a 0.3 or 0.5 mL syringe reads them directly.

Storage and handling

  • The discontinued Geref was a lyophilized product reconstituted before use. No current approved label exists, and research material has no stability data.
  • General practice: refrigerate reconstituted vials (2-8 °C), avoid freezing, protect from light, label.

Sermorelin was FDA-approved as Geref, which its maker discontinued in 2008. Research-grade sermorelin is not an approved product.

Sermorelin 5 mg vial questions

How much water goes in a 5 mg Sermorelin vial?

Any volume works; water only sets the concentration. 1 mL gives 5 mg/mL, 2 mL gives 2.5 mg/mL, 3 mL gives 1.667 mg/mL. Less water packs more mass into each syringe unit (harder to read precisely); more water spreads it out.

How many mcg are in one unit of a 5 mg vial?

On a U-100 syringe, one unit is 0.01 mL. With 1 mL of water, one unit holds 50 mcg; With 2 mL of water, one unit holds 25 mcg; With 3 mL of water, one unit holds 16.7 mcg.

How many units is 1 mg from a 5 mg vial?

At 1 mL of water, 1 mg is 20 units (0.2 mL). At 2 mL of water, 1 mg is 40 units (0.4 mL). At 3 mL of water, 1 mg is 60 units (0.6 mL). This is a unit conversion, not an amount to use.

Sources

  1. Prakash A, Goa KL. Sermorelin: a review of its use in the diagnosis and treatment of children with idiopathic GH deficiency. BioDrugs. 1999
  2. PubChem: Sermorelin
  3. WADA Prohibited List